To verify your Computerís Midi Setup check MyComputer/ControlPanel/Multimedia/Midi. Normally, Midi Output for Single Instrument should be selected.
Important: In order for 05W to communicate with the computer, Global setting EXCL has to be enabled.
1. Run 05wEdPro.exe.
2. From Options menu select MIDI SETUP:
3. Select Midi IN and Midi OUT ports where 05w connected to:
Press STOP and START. If midi communication between editor and synthesizer is OK then 05w ROM Version will be displayed.
4.If you have another Midi port with Midi Controller Keyboard hooked to it, you can use it to audition sounds by selecting MIDI IN (External Controller) port and activating it. This Feature will function properly only if there is separate port available on the system other than the port that synthesizer is connected to. MIDI In (External Keyboard) should not be set to the same Midi port as MIDI In (05w). If you using 05w Keyboard for playing notes, this port should not be activated.
5.If midi communication is OK then exit the MIDI SETUP window..
If communication between 05w and editor is OK, 05wís ROM version will be displayed on tom on MIDI SETUP Window and Global Channel will be automatically assigned.
Midi Settings are also automatically saved.
Midi Channel Thru - If you use keyboard controller to play notes, the notes are played on a specific midi channel (1 - 16). If this option in unmarked, the editor will automatically reroute midi channel to global channel in Program Mode or selectable channel in combi mode. Midi Channel for playing and auditioning can be selected in V-Piano or by computer keys.